• Are you a Tarantula hobbyist? If so, we invite you to join our community! Once you join you'll be able to post messages, upload pictures of your pets and enclosures and chat with other Tarantula enthusiasts. Sign up today!

Tarantula Heat Box

romedon

New Member
Messages
10
Location
turkiye
Hello, I started the hobby with three species.


  • GP is L6
  • Murinus mikumi was L5, now L6
  • LP is L3

The weather is gradually getting colder. Even though daytime temperatures are fine, nights have started to drop. Since I’m not home all the time, I don’t use the radiator or heater, and my home’s insulation is good, so I only heat the room if I get really cold. I don’t heat it at night.


I’m thinking of putting these three species in a large storage container and attaching a thermostat-controlled heating pad to the back or top to keep the internal temperature stable at around 24°C. What do you think about this setup? Do you have any alternative suggestions?
WhatsApp Image 2025-09-20 at 21.00.59.jpeg
 

m0lsx

Moderator
Staff member
1,000+ Post Club
3 Year Member
Tarantula Club Member
Messages
2,482
Location
Norwich, UK
Personally, I am not a big fan of using heat mats. But given your situation & the way you plan to do it. What you suggest, makes sense to me.

To put enclosures within a larger enclosure & then heat the air inside of that, using a thermostat & from the side or top, as you are going to do. Is certainly the safest way of using a heat mat. Do not set the temperature too high & keep an eye on the water within the enclosures & all should be fine.
 

Eighth Eye Blind

Member
Tarantula Club Member
Messages
52
Location
USA
I second m0lsx's distaste for heating devices. I build custom incubators and environmental chambers for my lab so I can personally attest to how difficult it is to get safe, consistent heating across even a small enclosure without professional-grade thermocouples and temp controllers.

If you go this route start with the lowest wattage heat source that will do the job and make sure to monitor the temp in different parts of the enclosure. A 5 to 10 watt heating element with a large surface area is usually all you need for something like this. I've seen consumer-grade controllers overshoot by 10°C when paired with a high-wattage heat source.

Set up the external enclosure and run it empty for a few days while moving a thermometer around inside to look for hot and cold spots before risking your animals. Remember that humidity is relative to temperature and that humidity inside the individual enclosures will be different from inside the environmental chamber which will also be different from the outer room. As m0lsx said, check the water dishes frequently to make certain things don't get too dry.

Also keep in mind that it'll take a couple of days for the temp to come up and stabilize as the substrate absorbs heat after you put the animals in. Don't make the mistake of cranking up the thermostat at the beginning because it seems the temp isn't rising fast enough. Be patient and let the temp get there over time. When animals and heating come together it's slow and steady that wins the race.

Good luck!
 

romedon

New Member
Messages
10
Location
turkiye
m0lsx'in ısıtma cihazlarına karşı duyduğu hoşnutsuzluğa katılıyorum. Laboratuvarım için özel kuluçka makineleri ve ortam odaları inşa ediyorum, bu yüzden profesyonel düzeyde termokupllar ve sıcaklık kontrol cihazları olmadan küçük bir alanda bile güvenli ve tutarlı bir ısıtma sağlamanın ne kadar zor olduğunu bizzat kendim söyleyebilirim.

Bu yolu seçerseniz, işe yarayacak en düşük watt'lı ısı kaynağıyla başlayın ve muhafazanın farklı bölümlerindeki sıcaklığı takip ettiğinizden emin olun. Böyle bir şey için genellikle geniş yüzey alanına sahip 5 ila 10 watt'lık bir ısıtma elemanı yeterlidir. Tüketici sınıfı kontrol cihazlarının yüksek watt'lı bir ısı kaynağıyla eşleştirildiğinde 10°C'ye kadar ısıyı aştığını gördüm.

Dış muhafazayı kurun ve hayvanlarınızı riske atmadan önce içeride bir termometre gezdirerek birkaç gün boş çalıştırın. Nemin sıcaklığa bağlı olduğunu ve muhafazaların içindeki nemin, dış odanın içindeki nemden farklı olacağını unutmayın. m0lsx'in de dediği gibi, su kaplarını sık sık kontrol ederek çok kurumamasını sağlayın.

Ayrıca, hayvanları yerleştirdikten sonra alt tabaka ısıyı emdiği için sıcaklığın yükselip sabitlenmesinin birkaç gün süreceğini unutmayın. Sıcaklık yeterince hızlı yükselmiyormuş gibi görünse de başlangıçta termostatı yükseltme hatasına düşmeyin. Sabırlı olun ve sıcaklığın zamanla yükselmesine izin verin. Hayvanlar ve ısıtma bir araya geldiğinde, yarışı kazanan yavaş ve istikrarlı bir yaklaşımdır.

İyi şanlar!
Bu detaylı cevabınız için hepinize teşekkür ederim.
 

Latest posts

Top